Anritsu MX269018A - Page 95

3.4 TX Measurement Mode
3-53
3
Measurement
Deviation (Hz) Resolution
■
Summary
Sets the resolution of the Deviation measurement result on the AF
Measurement Result (TX-AF) window.
■
Options
1 Hz Displays the Deviation result in 1 Hz.
0.1 Hz Displays the Deviation result in 0.1 Hz.
0.01 Hz Displays the Deviation result in 0.01 Hz.
AF Level (Hz rms) Resolution
■
Summary
Sets the resolution when AF Level measurement result is displayed
in Hz rms on the AF Measurement Result (TX-AF) window.
■
Options
1 Hz rms Displays the AF Level result in 1 Hz rms.
0.1 Hz rms Displays the AF Level result in 0.1 Hz rms.
0.01 Hz rms Displays the AF Level result in 0.01 Hz rms.
AF Level (dBr) Resolution
■
Summary
Sets the resolution when AF Level measurement result is displayed
in dBr on the AF Measurement Result (TX-AF) window.
■
Options
0.01 dBr Displays the AF Level result in 0.01 dBr.
0.001 dBr Displays the AF Level result in 0.001 dBr.
0.0001 dBr Displays the AF Level result in 0.0001 dBr.
Distortion (%) Resolution
■
Summary
Sets the resolution of the Distortion factor measurement result on
the AF Measurement Result (TX-AF) window.
■
Options
0.01% Displays the Distortion factor result in 0.01%.
0.001% Displays the Distortion factor result in 0.001%.
0.0001% Displays the Distortion factor result in 0.0001%.