EasyManuals Logo

Anritsu VNA Master MS2026C User Manual

Anritsu VNA Master MS2026C
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
MS20xxC UG PN: 10580-00305 Rev. L F-1
Appendix F — Waveguide Data
F-1 Introduction
This appendix provides lists of waveguide components and their characteristics.
F-2 Calibration Components
The calibration components part numbers in the following table are broken down as follows,
where the xx in the part number column (as in xxUM70) is replaced as follows:
xx: 23 = 1/8 Offset Short
24 = 3/8 Offset Short
26 = Precision Load
Table F-1. Precision Waveguide Calibration Components
Part Number Freq. Range (GHz) Waveguide Type Compatible Flanges
xxUM70 5.85 to 8.20 WR137, WG14 CAR70, PAR70, UAR 70, PDR70
xxUM84 7.05 to 10.00 WR112, WG15 CBR84, UBR84, PBR84, PDR84
xxUM100 8.20 to 12.40 WR90, WG16 CBR100, UBR100, PBR100,
PDR100
xxUM120 10.00 to 15.00 WR75, WG17 CBR120, UBR120, PBR120,
PDR120
xxUA187 3.95 to 5.85 WR187, WG12 CPR187F, CPR187G,
UG-1352/U, UG-1353/U,
UG-1728/U, UG-1729/U,
UG-148/U, UG-149A/U
xxUA137 5.85 to 8.20 WR137, WG14 CPR137F, CPR137G,
UG-1356/U, UG-1357/U,
UG-1732/U, UG-1733/U,
UG-343B/U, UG-344/U,
UG-440B/U, UG-441/U
xxUA112 7.05 to 10.00 WR112, WG15 CPR112F, CPR112G, UG-1358/U,
UG-1359/U, UG-1734/U,
UG-1735/U, UG-52B/U, UG-51/U,
UG-137B/U, UG-138/U
xxUA90 8.20 to 12.40 WR90, WG16 CPR90F, CPR90G,
UG-1360/U, UG-1361/U,
UG-1736/U, UG-1737/U,
UG-40B/U, UG-39/U,
UG-135/U, UG-136B/U

Table of Contents

Other manuals for Anritsu VNA Master MS2026C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Anritsu VNA Master MS2026C and is the answer not in the manual?

Anritsu VNA Master MS2026C Specifications

General IconGeneral
BrandAnritsu
ModelVNA Master MS2026C
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals