Anritsu VNA Master MS2026C - Chapter 6-System Operations; Introduction

MS20xxC UG PN: 10580-00305 Rev. L 6-1
Chapter 6 — System Operations
6-1 Introduction
This chapter describes the VNA Master system operations.
• “System Menu Overview” on page 6-2
• “System Menu” on page 6-4
• “Preset Menu” on page 6-14
• “Power On Self Test” on page 6-14
• “Firmware Update” on page 6-15
The other menus (Sweep, Measure, Trace, and Limit) are described in the Measurement
Guides that are listed in Appendix A.