5-5 File Menu File Management
5-8 PN: 10580-00305 Rev. L MS20xxC UG
5-5 File Menu
Key Sequence: File
Save Measurement As: Press this submenu key to save the current setup
with a user defined filename. The default filename is changed using the Save
menu. To change the default filename, type in a new filename with the number
keyboard and press Enter. After a few seconds, the screen returns to File
menu. Press the Save Measurement As key again and the new file name is
used.
Save Measurement: Press this key to display the “Save Menu” on page 5-9.
Measurements can be saved to internal memory or to a USB flash drive. The
saved measurement can be named by using the Save menu keys. By default,
measurements are saved to internal memory in a directory named /user. The
save destination is set with the “Save Location Menu” on page 5-10.
Save: Press this key to display the “Save Menu” on page 5-9. Measurements
can be saved to internal memory or to a USB flash drive. The saved setup,
measurement, or JPEG file can be named in the Save menu. By default,
measurements are saved to internal memory in a directory named /user. The
save destination is set with the “Save Location Menu” on page 5-10.
Save on Event: Press this key to display the “Save On ... Menu”
on page 5-12. This Save on Event submenu key is displayed only in
Spectrum Analyzer and Interference Analyzer modes (models MS203xC).
Recall Measurement: Press this key to display the “Recall Menu”
on page 5-13. This menu is for recalling measurements from internal memory
or from a USB flash drive.
Recall: Press this key to display the “Recall Menu” on page 5-13. This menu
is for recalling measurement or setup data from internal memory or from a
USB flash drive.
Copy: Press this key to display the “Copy Menu” on page 5-14. The Copy
menu is for copying files or folders from internal memory or a USB flash drive.
Delete: Press this key to display the “Delete Menu” on page 5-15 and a
selection box that shows the setup and measurement names and the type,
date, and time that the information was saved. Use the rotary knob or the
Up/Down arrow keys to highlight the file that is to be deleted, and then press
the Delete submenu key, then press Enter. Press the Esc key to cancel the
operation. Note that deleted files cannot be recovered.
Figure 5-6. File Menu
Caution Deleted files cannot be recovered.
File
Copy
Recall
Recall
Measurement
Recall
Save
On
Event
Save
Save Measurement As
FileName.spa
Save
Measurement
Delete
To Next Page
Loading...
Need help?
General
