5-5 File Menu File Management
5-12 PN: 10580-00305 Rev. L MS20xxC UG
Save On ... Menu
In Spectrum Analyzer and Interference Analyzer modes, this menu is used to auto save
measurements to internal memory after specific events occur.
Key Sequence: File > Save On Event
... Crossing Limit
On Off: Press this submenu key to toggle the Crossing Limit On or Off.
When On, measurements are saved to internal memory when the
measurement has crossed a defined limit line that has been created with the
Limit menu.
... Sweep Complete
On Off: Press this key to toggle the Sweep Complete setting On or Off.
When On, measurements are saved to internal memory after the current
sweep is complete. When Off, a measurement is saved after every sweep.
Save Then Stop
On Off: Press this key to toggle the Save Then Stop setting On or Off.
When On, the sweep is stopped after a measurement is saved. When Off
with Sweep Complete On, a measurement is saved after every sweep.
Clear All: Press this key to turn Off all three save-on-event keys:
Crossing Limit
Sweep Complete
Save Then Stop
Back: Press this key to return to the “File Menu” on page 5-8.
Figure 5-13. Save On ... Menu
Back
Clear All
Save On ...
... Crossing Limit
On Off
... Sweep Complete
On Off
Save Then Stop
On Off
To Next Page
Loading...
Need help?
General
