Antelope Pico - Multi Matrix Correction Presets (MCC) Menu

Operating Guide 28
Antelope Camera Systems
4.6.2 Multi Matrix Correction Presets (MCC) Menu
Pressing and holding the User Matrix / Scene Files Button (O) enters the Multi Matrix Correction
Presets (MCC) menu.
The active scene file is marked in red color. The arrow indicates the active menu item. By turning
the Select dial (Q) you select a preset and by pressing the Select dial (Q) once you load the
respective preset. LOADED flashes once in the display to indicate that the white balance has been
successfully set.
Multimatrix Presets
[RED = ACTIVE]
No Matrix <=
Sony Matrix
Grass Valley Matrix
Panasonic Matrix
USER MCC 1-> Empty
USER MCC 2-> Empty
USER MCC 3-> Empty
USER MCC 4-> Empty
All Color Matrix values set on the Operational Control Panel can be stored in the OCP. To save or
load the customs settings press and hold the User Matrix / Scene Files Button (O), then select
the respective memory slot (USER MCC 1-4) by turning the Select dial (Q). The arrow indicates
the active item. Briefly pressing the Select dial (Q) button allows you to save the actual settings to
the selected memory slot.
CONFIRM
LOAD Presets
=> NO YES
By turning the Select dial (Q) you select YES or NO. Confirm your choice by pressing the Select
dial (Q) once.
To delete all the settings for the selected memory slot, just press and hold the Select dial (Q).
CONFIRM
DELETE Presets
=> NO YES
By turning the Select dial (Q) you select YES or NO. Confirm your choice by pressing the Select
dial (Q) once.