Operating Guide 32
Antelope Camera Systems
4.10 Global Menu
Push the MENU Dial (E) to switch to the global settings menu. It allows access to these
parameters:
Format...
Genlock
Multimatrix...
Blacksun...
Invert Image
Reboot Camera
Sleep Mode...
Factory Reset
Sys Info...
Select the respective item by turning the Select dial (Q), then press the Select dial (Q) once. The
arrow indicates the active item. By turning the Select dial (Q) you change the settings. Confirm your
settings by pressing the Select dial (Q) once.
4.10.1 Format...
4.10.1.1 Video Mode
In the video settings menu the video HD format can be set. Select the respective item by turning the
Select dial (Q), then press the Select dial (Q) once. The arrow indicates the active item. By turning
the Select dial (Q) you change the settings. Confirm your settings by pressing the Select dial (Q)
once.
Format
Values are
1080i 50
1080i 60
1080i/59.94
1080p 23.98
1080p 24
1080p 25
1080p 29.97
1080p 30
1080p 50
1080p 59
1080p 60
720p 50
720p 59.94
720p 60
To Next Page
Loading...