Antelope Pico - Status; Multimatrix

Operational Control Panel (OCP)
35
Antelope Camera Systems
4.10.3.1 Status
Select the respective item by turning the Select dial (Q), then press the Select dial (Q) once. The
arrow indicates the active item. By turning the Select dial (Q) you change the settings. Confirm your
settings by pressing the Select dial (Q) once.
Status
Values are ON / OFF
4.10.3.2 Multimatrix Page 1
Select the respective item by turning the Select dial (Q), then press the Select dial (Q) once. The
arrow indicates the active item. By turning the Select dial (Q) you change the settings. Confirm your
settings by pressing the Select dial (Q) once.
Multimatrix P.1
0
BLUE
SAT:1.00
HUE:0.0
15
B+
SAT:1.00
HUE:0.0
30
B++
SAT:1.00
HUE:0.0
45
MG-
SAT:1.00
HUE:0.0
60
MG
SAT:1.00
HUE:0.0
75
MG
SAT:1.00
HUE:0.0
90
MG+
SAT:1.00
HUE:0.0
105
R-
SAT:1.00
HUE:0.0
120
R
SAT:1.00
HUE:0.0
135
R+
SAT:1.00
HUE:0.0
150
R/YL
SAT:1.00
HUE:0.0
165
YL-
SAT:1.00
HUE:0.0
Color abbreviations:
Blue, B+, B++ blue
MG-, MG, MG+ magenta
R-, R, R+ red
R/YL, YL- yellow