Antelope Pico - System Info

Operational Control Panel (OCP)
39
Antelope Camera Systems
4.10.9 System Info
Select the respective item by turning the Select dial (Q), then press the Select dial (Q) once. The
arrow indicates the active item. By turning the Select dial (Q) you change the settings. Confirm your
settings by pressing the Select dial (Q) once.
Cam Info
Displays the hardware info about the attached camera.
Model:
xxxxxx-xxxxxx
device id:
xxxxxxxxxxx
Version
Displays the hardware and firmware info about the CCU.
system id:
xxxxxxxxxxxx-xxxxxxxx-xxxxxxxx
hw revision:
00000000
xx xxx-xx
software release id:
000000:000000
00 0000 00
Controllers
Displays the hardware and firmware info about the connected controllers, like RCP, OCP, Splitter and
Motors.
OCP: v.3.98
RCP: v.3.89
Splitter: v.3,91
M. Box: v.3.91