Antelope Pico - Multimatrix; Load Default

Operating Guide 36
Antelope Camera Systems
4.10.3.3 Multimatrix Page 2
Select the respective item by turning the Select dial (Q), then press the Select dial (Q) once. The
arrow indicates the active item. By turning the Select dial (Q) you change the settings. Confirm your
settings by pressing the Select dial (Q) once.
Multimatrix P.2
100
YL
SAT:1.00
HUE:0.0
145
YL+
SAT:1.00
HUE:0.0
210
YL/G
SAT:1.00
HUE:0.0
225
G-
SAT:1.00
HUE:0.0
240
G
SAT:1.00
HUE:0.0
255
G
SAT:1.00
HUE:0.0
270
G+
SAT:1.00
HUE:0.0
285
CY-
SAT:1.00
HUE:0.0
300
CY
SAT:1.00
HUE:0.0
315
CY+
SAT:1.00
HUE:0.0
330
CY/B
SAT:1.00
HUE:0.0
345
B-
SAT:1.00
HUE:0.0
Color abbreviations:
B, B+, B+ blue
CY-, CY, CY+ cyan
G-, G, G+ magenta
YL, YL- yellow
4.10.3.4 Load Default
The default function returns all Multi Matrix values to their defaults.
Select YES or NO with Select dial (Q). The arrow indicates the active item. By turning the Select
dial (Q) you change the settings, then press the Select dial (Q) once.
CONFIRM
LOAD DEFAULT DEFAULT:
NO =>YES