Antelope Pico - Clear Bank; Lock Bank

Remote Control Panel (RCP)
81
Antelope Camera Systems
5.8.8 Clear Bank / Lock Bank
In standard trigger mode activated banks are recorded to by pushing the Trigger Button (E).
After triggering the filled banks have to be cleared in order to be used again. To clear the memory
banks simultaneously push the Clear Bank/Lock Bank button (M) and the corresponding Bank
Number Button (A).
In Loop trigger mode activated banks are recorded to by pressing the Trigger Button (E).
Pressing the Trigger Button (E) again overwrites the next available bank.
Note! Banks which are in use and therefor have the status Play cannot be deleted!
Banks can be protected against erasure (locked) by simultaneously pushing the Clear Bank/Lock
Bank button (M) and the corresponding Bank Number Button (A). Bank Number Button (A).
72
72