When a preset has been modified an asterisk appears next to its name in the tool bar.
4.1.2 Creation of a bank, sub-bank, preset
To create a new bank, click on the left button. The dropdown menu displays the
names of all of the existing banks of sounds, and a line called “New bank...”. Click on
“New bank...” to create a new bank of sounds. You can then change the name of this
bank by clicking on its name in the tool bar and entering the new name.
To create a new sub-bank, just click on the middle button, and select “New
subbank...”. You can also change the name of the new sub-bank.
Finally, to create a new preset, click on the right button, and select “New preset...”.
The new preset is created, recording the current settings of the Mini V. You can thus
work on the settings of a sound, and save the sound again with the same preset name by
clicking on the save button (see the following paragraph). You can also change the title
of the new preset by clicking on its name.
4.1.3 Saving a user preset
To save your setting modifications in the current preset, click on the “Save” button in the
tool bar of the Mini V.
“Save” button in the tool bar
If you want to save your settings under another preset name, click on the “Save As”
button in the tool bar. A dropdown menu appears and lets you choose an existing preset
(in this case, the contents of the existing preset will be replaced with the current
settings), or to save your settings as a new preset (in this case, click on “New preset...”
in the sub-bank of your choice).
“Save As” button and save menu in the tool bar
When you are working from a factory preset, which cannot be deleted, clicking on the
“Save” button will not replace the current factory preset, but will instead automatically
open the “Save As” menu to save the current settings as a user preset.
4.1.4 Import/ Export of a bank of presets
It is possible to import new banks of presets conceived for the Mini V. To import a new
bank of presets, click on the preset bank import button on the tool bar:
Preset bank import button on the tool bar
To Next Page
Loading...
