To select an individual or a group of instrument types:
First click on the “All” button, on the bottom of the type filter window: this will
hide all the instrument types from the sound map.
The ALL button
Then, select the type(s) you want to see by clicking on the corresponding square
box(es). A nock appears on the selected box(es) and the type(s) of presets
appears on the map interface.
Show pad presets
This is a good way to simplify and to refine the preset search.
If you click again on the “All” button, all the types of presets will be displayed on
the map.
4.2.2.4 Preset snap shot memories
You can select up to four presets, anywhere on the map interface, and save them on up
to four snap shot memories. You will be able to use those four presets on the “Morphing
View” (see below for more details) to create new sounds by morphing feature.
Of course, you can save any kind of type of presets on these four snap memories.
Select a snap memory
To save a preset on a snap memory:
Select a preset on the sound map main interface.
Hold the “Shift” key and select one of the four snap memory button. The snap
memory button is now highlighted in red.
Repeat the same actions if you wish to save presets on the three other snap
memories.
When all memories already contain a saved preset, you can replace them with other
presets:
Select another preset anywhere on the Sound Map interface, click on any of the 4
snapshot buttons while pressing the Ctrl key.
4.2.2.5 The “Morphing” interface
The “Morphing” page is an independent module allowing you to quickly create some new
sounds thanks to a real time morphing from the four selected presets saved on the snap
memories.
The four presets are placed on the four cardinal points of the compass.
To Next Page
Loading...
