Astraada SRV-64 - Page 11

AS64 series AC servo drive Overview
-5-
AS64 series servo drive (100W–2kW)
Specification
Description
Route
setting
1: Position
2: Speed
3: ACC time
4: DEC time
5: Stop timer
6: Status output
7: Running mode
Homing
1: LS signal
2: Phase-Z signal
3: LS signal + phase-Z signal
4: Torque limit signal
Protection
For hardware
Such as protection against overvoltage, undervoltage,
overcurrent, overspeed, overload, brake resistor
overload, drive overheating, encoder fault, power phase
loss, regenerative brake exception, and fan fault.
For software
Such as protection against ROM fault, initialization fault,
I/O distribution exception, and excessive position
deviation.
Fault recording
1: Ten faults can be recorded.
2: Key parameters can be recorded when a fault occurs.
Environment
Working temperature
0–45°C
Storage temperature
-20–80°C (no frozen)
Working/storage
humidity
≤90%RH (no condensation)
IP rating
IP20
Altitude
Below 1000m
Vibration
≤5.88m/s
2
, 10–60Hz (not allowing work at the resonance
point)