Atrust T180L - Page 146

Conguring Client Settings
Conguring Service Access Settings
136
Optimization Settings
Item Description
Connection Quality
Select the option that best describes the quality of your network connection.
Three options are available: LAN (Very Fast), Broadband (Fast), and
Modem (Slow).
NOTE: Selection here will determine the defaults of items in this section as
listed below.
Desktop background Check to use the desktop background.
Font smoothing Check to use ClearType
®
technology to make fonts clear and smooth.
Show window contents while
dragging
Check to show window contents while dragging a window.
Menu and window animation Check to show menu and window animation.
Visual styles Check to allow non-classic themes.
Persistent bitmap caching Check to allow client-side cache of bitmaps for a session.
Connection Settings
Item Description
Multimedia Redirection
Click the drop-down menu to disable/enable multimedia redirection.
When enabled, the client receives original compressed multimedia streams and
decodes locally for display. This feature increases the load on the client, but
saves server resources, decreases the bandwidth usage, and improves audio and
video playback experiences.
USB Storage Mapping
Click the drop-down menu to enable/disable USB storage mapping.
When Enable is selected, users can access the local USB storage devices, such
as a USB ash drive and memory card reader, in a Remote Desktop session.
NOTE: Atrust Client Setup also allows you to enable or disable the use of locally
attached USB storage devices. You need to enable locally attached USB
storage devices rst in order to use them in a Remote Desktop session.
The default is enabled.
NOTE: To congure the use of USB storage devices, please refer to section
“4.4.3 Conguring Settings for USB Storage Devices” on page 82.
Printer Mapping
Click the drop-down menu to enable/disable printer mapping.
When Enable is selected, users can access a local or network printer in a
Remote Desktop session.
NOTE: You need to add a local or network printer for your t180L/t180LB rst,
and then enable this feature here to use that printer in a Remote
Desktop session.
NOTE: For detailed instructions on how to add a local or network printer for your
t180L/t180LB, please refer to section “4.4.7 Adding a Local Printer” on
page 86 or “4.4.8 Adding a Network Printer” on page 89.