Audi TT 207 - Noise Insulation Frame; Fender Brace

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.7 Noise Insulation Frame
Removing
1 - Frame
❑ Noise insulation re‐
moved.
❑ Remove bolts -2- and
-3- and remove frame.
2 - Bolt
❑ 23 Nm
3 - Bolt
❑ 23 Nm
4 - Internally threaded pop rivet
5 - Longitudinal member
1.8 Fender Brace
– Fender removed.
– To remove, only loosen bolts -2- and slide brace forward out
of elongated holes.
♦ Bolts -2- 23 Nm
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
8 Rep. Gr.50 - Body Front