Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Adjust Stop Buffer:
• The inner stop buffers -1- act as a strike guard and should not
make contact with the hood closed.
– Adjust the height of the hood stop buffers by turning them
-arrows-.
1.2.4 Hood Locks Assembly Overview
1 - Nut
❑ 9 Nm
2 - Brace
3 - Bolt
❑ 11 Nm
4 - Bolt
❑ 11 Nm
5 - Anti-theft protection
6 - Right hood lock
❑ Removing and Instal‐
ling, refer to
⇒ “2.2.8 Left and Right
Hood Lock“, page 43
7 - Right mount for hood lock
8 - Bolt
❑ 3 Nm
9 - Left mount for hood lock
10 - Bolt
❑ 10 Nm
11 - Left hood lock
❑ Removing and Instal‐
ling, refer to
⇒ “2.2.8 Left and Right
Hood Lock“, page 43
12 - Front hood lock
❑ with the hood contact
switch -F266-
❑ Can be used to adjust
the hood height
⇒ “1.2.3 Hood, Adjust‐
ing“, page 14
❑ Removing and Installing, refer to ⇒ “2.2.7 Center Hood Lock“, page 42
13 - Bolt
❑ 11 Nm
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
16 Rep. Gr.55 - Hood, Lids
To Next Page
Loading...
