Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1.26 Convertible Top Latch
Removing
– Front cover removed.
1 - End plate
2 - Nut
❑ 9 Nm
3 - Convertible top lock
❑ The locks on the conver‐
tible top are preset
above the locking rods
and do not need to be
adjusted.
4 - Convertible top
5 - Bolt
❑ 9 Nm
6 - Convertible top latch
7 - Convertible top latch motor
❑ Removal ⇒ page 144
8 - Bolt
❑ 10 Nm
2.1.27 Convertible Top Lock
Removing
Note
♦
Shims with different inner diameters are located between the
convertible top lock and front rail.
♦
The first shim for the front rail must have the largest inner di‐
ameter.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation 143
To Next Page
Loading...
