Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Tighten bolt to 2 Nm when installing.
– Unclip collar -1- in direction of -arrow-.
– Unclip cover -2- at front trim -1- -arrow-.
2.1.31 Convertible Top Latch Handle
Removing
– Tighten handle -2- with bolts -1- to 8 Nm.
– Clip -3- clipped in.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
146 Rep. Gr.61 - Convertible Top
To Next Page
Loading...
