Audi TT 207 - Fender End Plate

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.9 Fender End Plate
Removing
1 - End plate
– Remove front wheel.
– Remove wheel housing
liner. Refer to
⇒ “3.8.1 Front Wheel
Housing Liner“,
page 255 .
❑ Fluid reservoir, loosen‐
ing
– Remove plugs -3- and
slide end plate -1- out
downward.
❑
2 - Plugs
3 - Screws
❑ 11 Nm
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Removal and Installation 9