Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Fender Dimensions
– Pull off the protective film -arrow- prior to installation.
♦ Dimension -a- = 41mm
♦ Dimension -b- = 42 mm
♦ Dimension -c- = 34 mm
2.2 Spoiler - TT
⇒ “2.2.1 Rear Lid Spoiler Gap Dimensions“, page 223
2.2.1 Rear Lid Spoiler Gap Dimensions
Coupe Gap Dimensions
The gap dimensions can be checked with the Adjustment Gauge
-3371- .
• Dimension -D- = 2 mm
• Dimension -E- = 2 mm
Roadster Gap Dimensions
• Dimension -D- = 2 mm
• Dimension -E- = 2 mm
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Specifications 223
To Next Page
Loading...
