Audi TT 207 - Impact Member

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
7 - End plate
❑ No replacement part
❑ Slide into support -8- on lock carrier as shown.
8 - Carrier piece
❑ No replacement part
❑ Part of lock carrier delivery package.
9 - Left cover
❑ Unclip
10 - Nut
❑ Use -T40078- to loosen or tighten nut.
❑ 6.5 Nm
2.1.3 Impact Member
1 - Impact absorber
❑ Connected to impact
member
2 - Bolt
❑ 30 Nm
3 - Side impact bar
❑ After bolts -2- are re‐
moved, clamping wash‐
ers on top and bottom of
bracket must be re‐
moved.
4 - Bumper
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
166 Rep. Gr.63 - Bumpers