Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.4.7 Rear Lid Seal
1 - Lid seal
❑ To remove, remove seal
from body flange.
❑ When assembling, align
seal with butt joint
-arrow- on left ball stud
and press on all around
body flange.
2.5 Fuel Filler Door
⇒ “2.5.1 Fuel Filler Door“, page 67
⇒ “2.5.2 Fuel Filler Door Drain Hose“, page 70
⇒ “2.5.3 Fuel Filler Door, Installation Position“, page 71
2.5.1 Fuel Filler Door
Special tools and workshop equipment required
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation 67
To Next Page
Loading...
