Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Special hook -3370-
1 - Fuel filler door cable
2 - Screws
❑ 4 Nm
3 - Catches
❑ Catches must close
flush with lower part of
fuel filler door.
4 - Fuel filler door
❑ When removing, re‐
move cable -1- on the
fuel filler door.
❑ Proceed as follows
when installing a new
fuel filler door:
– Guide cable through
opening in fuel filler door
cup.
– Insert fuel filler door di‐
agonally until catches
on protruding flange en‐
gage in side panel.
– Press fuel filler door
down against fuel filler
door cup tension until
sliding catches visibly
engage.
– Secure fuel filler door
with bolts (quantity: 3).
5 - Fuel filler door cup
6 - Drain hose
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
68 Rep. Gr.55 - Hood, Lids
To Next Page
Loading...
