Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1.32 End Plate
Removing
1 - End plate
❑ Window crossmember
cover, removing, refer to
⇒ Body Interior; Rep.
Gr. 70 ; Removal and
Installation
❑ To remove, disconnect
the electrical connector
and unscrew the
screws.
2 - Bolt
❑ 15 Nm.
3 - End plate cover
❑ To remove, unclip.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation 147
To Next Page
Loading...
