Audi TT 207 - Release Cable Routing on Hinge

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.4.4 Release Cable Routing on Hinge
Cable Routing on Hinge
1 - Cover
❑ Press cover sideways
onto hinge
2 - Release cable
3 - Hinge grommet
❑ When pressing into
hinge, grommet must
engage audibly.
4 - Rear lid hinge
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation 23