Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
66 – Exterior Equipment
1 Description and Operation
⇒ “1.1 Exterior Rearview Mirror“, page 219
⇒ “1.2 Radiator Grille - TT RS“, page 220
1.1 Exterior Rearview Mirror
⇒ “1.1.1 Rearview Mirror Assembly Overview“, page 219
1.1.1 Rearview Mirror Assembly Overview
1 - Exterior rearview mirror
housing
❑ Removing and instal‐
ling, refer to
⇒ “3.2.2 Mirror Hous‐
ing“, page 233 .
2 - Bolt
❑ 2 Nm
3 - Seal
❑ Seal set
4 - Screws
❑ 6.5 Nm
5 - Mirror base cover
6 - Mirror base
7 - Seal
❑ Seal set
8 - Mirror adjustment electrical
wire
9 - Door
10 - Adjusting piece
❑ Used for mirror angle
adjustment.
11 - Carrier plate
❑ Must be removed to re‐
move mirror adjusting
unit.
12 - Mirror adjusting unit
❑ Removing and instal‐
ling, refer to
⇒ “3.2.3 Electric Mirror
Adjusting Unit“, page 234 .
13 - Harness connector for mirror heater
14 - Mirror glass
❑ Removing, refer to ⇒ “3.2.1 Mirror Glass“, page 231 .
15 - Mirror motor connector
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation 219
To Next Page
Loading...
