Audi TT 207 - Rear Bumper - Audi TT RS

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.4 Rear Bumper - Audi TT RS
⇒ “1.4.1 Rear Bumper Assembly Overview“, page 160
⇒ “1.4.2 Impact Member, Shock Absorber and Guide Piece As‐
sembly Overview“, page 161
1.4.1 Rear Bumper Assembly Overview
1 - Bolt
❑ Quantity: 4
❑ 2 Nm
2 - Bumper spoiler
❑ Removing and Instal‐
ling, refer to
⇒ “2.4.2 Rear Bumper
Spoiler“, page 184
3 - Lower bumper trim
❑ Removing and Instal‐
ling, refer to
⇒ “2.4.2 Rear Bumper
Spoiler“, page 184
4 - Bolt
❑ Quantity: 4
❑ 2 Nm
5 - Left exhaust pipe trim
❑ Removing and Instal‐
ling, refer to
⇒ “2.4.4 Exhaust Pipe
Trim“, page 185
6 - Bolt
❑ Quantity: 2
❑ 2.5 Nm
7 - Cover strip
❑ For bumper
❑ Removing and Instal‐
ling, refer to
⇒ “2.4.1 Rear Bumper“,
page 182
8 - Bumper
❑ Removing and Instal‐
ling, refer to ⇒ “2.4.1 Rear Bumper“, page 182
9 - Cover
❑ For the towing eye
10 - Bolt
❑ Quantity: 2
❑ 2.5 Nm
11 - Right exhaust pipe trim
❑ Removing and Installing, refer to ⇒ “2.4.4 Exhaust Pipe Trim“, page 185
12 - Diffuser trim
❑ Removing and Installing, refer to ⇒ “2.4.3 Diffuser Trim“, page 185
13 - Bolt
❑ Quantity: 2
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
160 Rep. Gr.63 - Bumpers