Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Window regulator
❑ To adjust, run window
regulator all the way
down.
❑ Guide 5 mm hex socket
head wrench through
door panel from below
into adjusting screws
and -arrows- and adjust.
2 - Rear driver
❑ Rear adjusting screw
-arrow-
3 - Front driver
❑ Front adjusting screw
-arrow-
Window regulator motor, removing
– Door trim removed. Refer to ⇒ Body Interior; Rep. Gr. 70 ;
Removal and Installation
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation 89
To Next Page
Loading...
