Parameter name Default value Description
PHY2TAGS 0 Determines whether VLAN tags are stripped on
Ethernet frames going out of the computer (PC)
port.
The options are:
• 0: Strips VLAN tags from Ethernet frames
leaving the computer (PC) port of the phone.
• 1: Does not strip VLAN tags from Ethernet
frames leaving the Computer (PC) port of the
phone.
PHY2TAGS is configured through the
46xxsettings.txt file.
L2QVLAN 0 Specifies the voice VLAN ID to be used by IP
phones.
Valid values are from 0 to 4094.
L2QVLAN is configured through:
• A local admin procedure
• A name equal to the value pair in the
DHCPACK message
• A SET command in the 46xxsettings.txt
file
• DHCP option 43
• LLDP
PHY2VLAN 0 Specifies the value of the 802.1Q VLAN ID that
is used to identify network traffic going into and
coming out of the internal CPU of the phone.
Valid values are from 0 to 4094.
PHY2VLAN is configured through:
• A SET command in the 46xxsettings.txt
file
• LLDP
Table continues…
Virtual LAN overview
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 67
Comments on this document? infodev@avaya.com