Avaya IP500 V2 - Page 107

IP500/IP500 V2 Installation Page 107
15-601042 Issue 25i (03 January 2013)IP Office 8.0
Initial Configuration Using IP Office Manager: Changing the Default Passwords
7.
Click on the General . The general security settings are displayed in the main display area.
· Click on Change and enter a new password for the security administrator.
8.
Click on File | Configuration to exit security configuration mode and return to the IP Office configuration.
Changing the Remote User Password
The IP Office configuration contains a user whose password is used as the default for remote dial in access to the IP Office
network. The password of this user should be changed.
1.
Start IP Office Manager and connect to the IP Office system.
2.
Click on Users and in the list of users click on Remote Manager.
3.
On the User tab, enter a new password for the user and click OK.
4.
Click on the icon and save the updated configuration back to the IP Office system.
68