IP500/IP500 V2 Installation Page 165
15-601042 Issue 25i (03 January 2013)IP Office 8.0
SD Card Management: Backing Up the System SD Card
7.4.4 Restoring from the Optional Card
The files in the /primary folder on the Optional SD card can be copied to the /primary folder on the System SD card.
Any files with matching file names will be replaced. The IP Office is then restarted using the files now in the System SD
card's /primary folder.
The restore process is separated into two parts, either copying configuration files from the Optional SD card or copying
software files from the Optional SD card. This allows software files to be copied from an Optional SD card without affecting
the existing configuration of that system.
· ! WARNING
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
7.4.4.1 Restoring a Configuration from an Optional Card
The following processes copy the configuration file (config.cfg) and licenses file (keys.txt). The processes take a few
seconds.
· ! WARNING
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
Copying a Configuration from the Optional SD Card File Using IP Office Manager
1.
Using IP Office Manager, select File | Embedded File Management.
2.
Using the Select IP Office menu, select the IP Office system.
3.
The file contents of the memory cards are displayed.
4.
Select File | Upgrade Configuration.
· The configuration file (config.cfg) and licenses file (keys.txt) in the /primary folder on the Optional SD card
are copied to the /primary folder on the System SD card. This process takes approximately a few seconds.
· When the process has been completed, the IP Office system will be restarted.
Copying a Configuration File from the Optional SD Card Using a System Phone
This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400, 5600
or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict access to
system administration functions on the phone.
1.
Select Features | Phone User | System Admin.
2.
Enter your IP Office user login code.
3.
From the menu select Memory Card.
4.
Select Upgrade Config....
· The configuration file (config.cfg) and licenses file (keys.txt) in the /primary folder on the Optional SD card
are copied to the /primary folder on the System SD card. This process takes approximately a few seconds.
· When the process has been completed, the IP Office system will be restarted.
To Next Page
Loading...
