Avaya IP500 V2 - Digital Station 16;30

IP500/IP500 V2 Installation Page 232
15-601042 Issue 25i (03 January 2013)IP Office 8.0
9.5.3 Digital Station 16/30
IP Office 500 Digital Station modules can be used to add additional DS ports to an IP Office system. The module is
available in 16 and 30 port variants, referred to as the IP500 Digital Station 16 and IP500 Digital Station 30 respectively.
For phones requiring a TCM port, for example M-Series and T-Series phones, use IP500 Digital Station 16A and 30A
modules .
Feature
Details
Supported on
IP500 and IP500 V2.
Locales
Supported in all IP Office locales .
Software Level
IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13
power cord for the external PSU is required but is not supplied with the module.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IPO IP500 RACK
MNTG KIT. It can be wall mounted using the IPO IP500 RACK MNTG KIT V2.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30 V2)
381
234
48
34