IP500/IP500 V2 Installation Page 131
15-601042 Issue 25i (03 January 2013)IP Office 8.0
Additional Processes: Upgrading the IP Office Software
6.7.3 Upgrading 2400/5400 Phones
The firmware on most phones connected to an IP Office system is automatically upgraded if necessary when a phone is
first connected to an IP Office port or for existing phones, after a system reboot. However this does not apply to Avaya
2400 Series and 5400 Series phones.
Checking the Firmware on a 2410 or 5410 Phones
1.
Press Exit to ensure that the phone has exited any other usage mode.
2.
Press either of the display keys next to MENU.
3.
Select OPTION.
4.
Select Self Test. The display should now show details of the phone's currently installed firmware.
5.
The firmware loaded into the phones has a major and minor version. The Major version in the example above is
shown as FWV=2 and the minor version is shown as REL:2.00.
6.
Press Exit to exit self test mode.
Checking the Firmware on a 2420 or 5420 Phones
1.
Select OPTION.
2.
Select Self Test. The display should now show details of the phone's currently installed firmware.
3.
The firmware loaded into the phones has a major and minor version. The Major version in the example above is
shown as FWV=4 and the minor version is shown as REL:4.00.
4.
Press Done to exit self test mode.
To Next Page
Loading...
