Avaya IP500 V2 - IP500 Trunk Daughter Cards

IP500/IP500 V2 Installation Page 234
15-601042 Issue 25i (03 January 2013)IP Office 8.0
9.5.4 Digital Station 16A/30A
These modules can be used to add additional ports for Avaya digital (non-IP) extensions for TCM phones, for example M-
Series and T-Series phones. The module is available in 16 and 30 port variants, referred to as the IP500 Digital Station
16A and IP500 Digital Station 30A respectively. For phones requiring DS ports, for example 1400 Series and 9500 Series
phones, see the Digital Station 16 and 30 modules .
The modules are available with RJ21 connectors (1 on the 16 port version, 2 on the 30 port version).
Digital Station 30A (RJ21 Variant)
Feature
Details
Supported on
IP500 V2 only.
Locales
Supported in all IP Office locales .
Software Level
IP Office Release 7.0 minimum (TCM only). Bin file = nadcpaV1.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific IEC60320 C13
power cord for the external PSU is required but is not supplied with the module.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IPO IP500 RACK
MNTG KIT. It can be wall mounted using the IPO IP500 RACK MNTG KIT V2.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Weight
Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30A RJ21)
232
48
34