Avaya IP500 V2 - Restore from the Backup Folder

IP500/IP500 V2 Installation Page 163
15-601042 Issue 25i (03 January 2013)IP Office 8.0
SD Card Management: Backing Up the System SD Card
7.4.2 Restore from the Backup Folder
The contents of the /backup folder on the System SD card can be copied to the /primary folder. Any files with matching
file names will be replaced. The IP Office is then restarted using the files now in the /primary folder.
· ! WARNING
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
Using IP Office Manager
1.
Using IP Office Manager, select File | Embedded File Management.
2.
Using the Select IP Office menu, select the IP Office system.
3.
The file contents of the memory cards are displayed.
4.
Select File | Restore System Files.
· The contents of the /backup folder on the System SD card will be copied to the /primary folder. The process
takes approximately 6 minutes.
· When the process has been completed, the IP Office system will be restarted.
Using the System Status Application
1.
Start System Status and access the IP Office's status output.
2.
In the navigation panel select System.
3.
At the bottom of the screen select Restore System Files.
· The contents of the /backup folder on the System SD card will be copied to the /primary folder. The process
takes approximately 6 minutes.
· When the process has been completed, the IP Office system will be restarted.
Using a System Phone
This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400, 5600
or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict access to
system administration functions on the phone.
1.
Select Features | Phone User | System Admin.
2.
Enter your IP Office user login code.
3.
From the menu select Memory Card.
4.
Select System Restore.
· The contents of the /backup folder on the System SD card will be copied to the /primary folder. The process
takes approximately 6 minutes.
· When the process has been completed, the IP Office system will be restarted.
69