IP500/IP500 V2 Installation Page 155
15-601042 Issue 25i (03 January 2013)IP Office 8.0
SD Card Management:
Card Maintenance Actions
Using IP Office Manager, IP Office System Status Application or a phone configured as a System Phone, a number of
actions can be performed on the SD cards.
Memory cards should always be shutdown before
being removed when the system is running. Though
the card slot LEDs indicate when data is being
written to an card, lack of flashing LED is not a
sufficient safeguard. Shutting down the card will
disable Embedded Voicemail if being used. If the
System SD card is removed, features licensed by
the card's Feature Key serial number will continue
operating for up to 2 hours.
Copy the files in the /primary folder on the System
SD card to the /backup folder on the card.
Copy the files in the /backup folder on the System
SD card to the /primary folder on the card and
restart the IP Office system.
Copy all the files on the System SD card to the
Optional SD card.
Copy software files in the /primary folder on the
Optional SD card to the /primary folder on the
System SD card and then restart the IP Office
system.
Copy the configuration file in the /primary folder on
the Optional SD card to the /primary folder on the
System SD card and then restart the IP Office
system.
Upload a set of IP Office software and Embedded
Voicemail prompts to the System SD card.
View the folders and files on the control unit memory
cards.
The actions below can be performed on cards in a SD
card reader on a PC running IP Office Manager.
Reformat a card for IP Office usage without removing
the Feature Key serial number.
· This process will erase all existing files on the
card.
Create the folder structure on a memory card and
copy a set of IP Office software files into those
folders.
·
170
170
162
163
164
167
167
167
161
159
159
To Next Page
Loading...
