Avaya IP500 V2 - Page 206

IP500/IP500 V2 Installation Page 206
15-601042 Issue 25i (03 January 2013)IP Office 8.0
Ports
Description
AUDIO
3.5mm Stereo jack socket. Used for external music on hold source input.
CPU
· Alternate red/green = Starting up.
· Green on = Okay.
· Red on = No software.
· Flashing Red = Error/Shutdown.
C/F
· Off = Card shutdown .
· Green on = Card present.
· Green flashing = Card in use.
· Orange steady = Reset imminent.
· Red flashing = Card initializing or shutting down.
· Red fast flashing = card full
· Red steady = Card failure/wrong type.
C/F TII
Used to house the optional Embedded Voicemail card.
EXPANSION
RJ45 socket. Used for direct connection to external expansion modules using the Expansion Interconnect
cable supplied with the expansion module.
EXT O/P
3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls. The
port contains two independent switches controlled by the IP Office.
INPUT
AC power input port.
LAN
RJ45 socket. With the WAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
10/100Mbps auto-sensing, MDI crossover ports.
RESET
This switch is used to restart the IP Office, optionally erasing the configuration and or the core software in
the process. See Reset Button .
RS232
9-Way D-Type socket. Used for system maintenance.
USB
Not used.
WAN
RJ45 socket. With the LAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
10/100Mbps auto-sensing, MDI crossover ports.
Used for connection of a functional or protective ground . Use of a ground for all systems is
recommended and for some locales may be a regulatory requirement.
378
170
384
137
385
145
145
146
385
197