Name Description
Long Distance Access Code Specifies the long distance access code.
The valid value range is a sting of integers from 0 to 9, and
empty. The default value is 1.
Internal Extension Number Length Specifies the length of an internal extension number.
The valid value is an integer from 3 to 13. The default value is
5.
National Telephone Number Length Specifies the length of a national phone number.
The valid value is an integer from 5 to 15. The default value is
10.
Outside Line Access Code Specifies the number for making an outside call, i.e. a local call
in a public network.
The valid value is up to 2 dialable characters. The default value
is 9.
Value format: digits from 0 to 9, *, #.
Remove PSTN access prefix from
outgoing number
Allows dialing digits during failover and removing of the PSTN
access prefix from the outgoing number.
The options are:
• No (default)
• Yes
Admin
Admin Access allowed from Phone Specifies whether the craft procedures are used for the phone
configuration.
The options are:
• Yes (default)
• No
Admin Login fail attempt allowed Specifies the number of failed attempts to enter the
Administration access code before the login is locked.
The options are from 1 to 20. The default value is 10.
Admin Login Locked Time after fail
attempt
Specifies the time interval in minutes to re-enter the
Administration access code after the login is locked.
The valid value is an integer from 5 to 1440. The default value
is 10 minutes.
MLPP
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 128
Comments on this document? infodev@avaya.com
To Next Page
Loading...
