Avaya J129 - Page 129

Name Description
Enable MLPP Specifies whether the MLPP feature is enabled.
The options are:
• Disable (default)
• Enable
Maximum Precedence Level Specifies the maximal allowed precedence level for the user.
The options are from 1 to 5. The default value is 1.
MLPP Network Domain Specifies the MLPP Network Domain.
The valid values are: empty, “uc” and “dsn”. The default value is
empty.
MLPP Precedence Domain Specifies the MLPP Precedence Domain.
The valid value is a sting of alphanumeric characters. The
default value is “000000”.
Enable Precedence Softkey Controls whether the Precedence soft key should be displayed
on idle line appearances on the phone screen.
The options are:
• Disable
• Enable (default)
Guest Login
Guest Login Enable Specifies whether the Guest Login feature is available on the
phone.
The options are:
• Disable (default)
• Enable
Guest Login Session Duration
(hours)
Specifies the time interval in hours before a guest or a visiting
user will be automatically logged off if the telephone is idle.
The valid value is an integer from 1 to 12. The default value is 2
hours.
Guest Login Session Warning Time
(minutes)
Specifies the time interval in minutes before a warning of the
automatic logoff is initially displayed for a guest or a visiting
user.
The valid value is an integer from 1 to 15. The default value is 5
minutes.
Save Extension
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 129
Comments on this document? infodev@avaya.com