Parameter name Default
value
Description
WARNING_FILE Null Specifies the file name or URL for a
custom single-channel WAV file
coded in ITU-T G.711 u-law or A-
law PCM with 8-bit samples at
8kHz to be used as a call recording
warning instead of the built-in
English warning.
The value can contain 0 to 255
characters.
WBCSTAT 1 Specifies whether a wideband
codec indication is displayed when
a wideband codec is used.
Value operation:
• 0: Disabled
• 1: Enabled
WEB_ADMIN_PASSWORD 27238 Specifies the password to access
the phone through a web browser
as an administrator.
The value set from the web server
interface has a higher priority than
that of the Settings file.
If the Web admin password is
changed using the web server, then
the web admin password set
through settings file is not used until
either the web admin password is
set to default through the phone
admin menu or the phone is reset
to default.
Valid values are from 8 to 31
alphanumeric characters including
upper, lower and special
characters.
WEB_HTTP_PORT 80 Specifies the port on which the
Web Server running on the phone
will be accessed using HTTP.
Valid values are 0, 80, 1024 to
65535.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 317
Comments on this document? infodev@avaya.com
To Next Page
Loading...
