Output – information include:
Port corresponds to the HDMI OUT port number.
Resolution allows user to set the output display according to the connected monitor’s
resolution. You can select the output resolution for Auto (default) / 3840×2160 50/60Hz /
3840×2160 25/30Hz / 1920×1080 50/60Hz / 1280×1024 50/60Hz from the drop down
menu.
Fullscreen corresponds to the “Source” window number that is now in fullscreen mode.
OSD allows user to turn On (default enable) / Off (disable) the display of audio tally, label
and border.
Layout – free-scaling adjustment for each window on a pixel-basis. Configurable properties
include:
Source 1 – 4 for Visible (default) or Hidden the window on the display connected to the
Sequoia 4K60.
X and Y adjust the window’s starting position (top-left corner). Use the up/down icons on
the right-edge to adjust.
Width (2-pixel increments) and Height (1-pixel increment) adjusts the window’s size. Use
the up/down icons on the right-edge to adjust.
Z value (0 to 3) shows the priority (layer) for each window; 0 represents the top-most layer.
Use the up/down icons on the right-edge to select.
Aspect Ratio for selecting between Fill up screen (the image will completely fill up the
window but the image distortion may occur), Auto detect (default), 16:9 or 4:3.
Fit to window changes the window size to conform to the image’s original aspect ratio On
(default) or Off.
OSD option (system) – set the color properties of tally, pop-up menu, label color and text, set
border color and border width as well.
Default – resets the OSD to its factory default state.
Label – sets the label property of the four windows on the display connected to the
Sequoia 4K60.
Enable – enable label display on each windows.
Font color – click the color box to set the label color in the “Select Color” dialog box.
Background color – click the color box to set the label background in the “Select Color”
dialog box.
Border – sets the border color on windows as well as the border width.
Color – click the color box to set the border color in the “Select Color” dialog box.
Width (0, 2, 4, 6) – set the border width on all windows.
HDMI audio switch – enable HDMI audio tally display on/off of embedded audio in HDMI
output signal and the color of HDMI audio switch.
Enable – enable HDMI audio tally display on/off of embedded audio in HDMI output
signal.
On color – setups the turn “on” color of HDMI audio switch. Click the color box to set the
tally color in the “Select Color” dialog box.
Off color – setups the turn “off” color of HDMI with audio. Click the color box to set the
tally color in the “Select Color” dialog box.
Popup menu – customize the color of your popup menu. Click the color box to set the
color in the “Select Color” dialog box.
Active color – indicates the input source is currently displaying on the monitor.
Available color – indicates the available input source.
Disable color – indicates the absent input source.
Fullscreen Control – sets the functions of KM control switching, layout changing and
remains aspect ratio.
Enter Remote mode –
Select Automatically to enable a particular window to enter Remote operation mode
when using any of the below methods to switch to fullscreen view:
“Ctrl – # (1 to 5) – # (1 to 4)” hotkeys, or
Click icon (top-right corner of windows and only available for HDMI OUT 1)
Select None to disable the K/M function automatically be switched to Remote operation
mode when a particular window in fullscreen. Each time when a particular window set to
fullscreen display, you need to double-click on the window to enter Remote operation
mode for accessing the computer.
To Next Page
Loading...