8. Input
8.5.2 Background Logo
What can be done ?
A logo can be switched on or off.
When logo is switched on and a logo is available, that logo will be displayed when no signal is available for the main window an no
signal available for the PiP window in case PiP is On..
How to activate logo
1. Press Menu to activate the menus and select Input → N o S ignal. → Logo.
2. Press ENTER to toggle between [On] or [Off].
Image 8-20
Main window
Image 8-21
Input, no signal
Image 8-22
No signal, logo
A dedicated logo can be loaded via Projector Toolset with a HDX plug-in installed.
108 R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
