Barco HDX series - 16.4 Removal of the front cover

16. Servicing
16.1 Inserting an input module
WARNING: Switch off the projector and unplug the power cord before starting the procedure.
How to insert
1. Loosen both screws of the dummy cover plate (1).
1
2
3
Image 16-1
Insert input module
2. Take off the dummy cover plate.
3. Insert the new input module in its compartment.
Make sure the module seats in its sliders (2).
Pull in the module until the contacts (3) are fully inserted into the connectors.
4. Fixate both fi xation screws.
1
Image 16-2
Fixate input
296 R5905032 HDX SERIES 01/06/2011