9. Image
9.5.2 Advanced timings, clamp delay - clamp width
About the advanced settings
Clamp delay The time between the trailing edge of the sync pulse and the leading edge of the clamp pulse, in pixels.
Can be any value between 0 and 255.
Clamp width The width of the clamp pulse can be any value between 0 and 255.
Sync
pulse
Clamp
pulse
Clamp
delay
Clamp
width
Leading edge
Trailinging edge
Image 9-48
How to change the clamp delay - clamp width
1. Press Menu to activate the menus and select Image → Timings → Adv anced settings.
Image 9-49
Main menu, Image
Image 9-50
Image, timings
Image 9-51
Timings, advanced settings
2. Press ENTER to select.
R5905032 HDX SERIES 01/06/2011
135
To Next Page
Loading...
