14. Service
14.3.6 Tilt sensor
What is possible?
The built-in tilt sensor can be read out to see if the projector is used in an allowed position. The status field indicates whether the
rotation of the projector is normal or abnormal.
Using a projector with an abnormal rotation can severely damage the lamp.
How to check the tilt sensor
1. Press Menu to activate the menus and select Service → Diagnosis → Tilt sensor.
Image 14-29
Main menu, service
Image 14-30
Service, diagnosis
Image 14-31
Diagnosis, tilt sensor
2. Press ENTER to read out the tilt sensor.
Image 14-32
Tilt sensor output
R5905032 HDX SERIES 01/06/2011 275
To Next Page
Loading...
