13. Projector Control
13.5.7 Wireless DHCP set up
Can only be used with a wireless network module installed.
How to set up
1. Press Menu to activate the menus and select Pr ojector Control → Network → Wireless.
Image 13-34
Main menu, projector control
Image 13-35
Projector control, network
Image 13-36
Network, wireless
Image 13-37
Wireless, DHCP
2. Use the ▲ or ▼ key to select DHC P and press ENTER to toggle between [On] or [O ff].
[On] : Wireless DHCP is activated. An automatic IP address is assigned.
[Off] : Wireless DHCP is deactivated. A fixed address must be used.
R5905032 HDX SERIES 01/06/2011
243
To Next Page
Loading...
