16. Servicing
16.8 Replacement of the high density dust filter
CAUTION: The high density filter must be replaced on a regular basis, depending on the environment condi-
tions of the projector.
WARNING: Switch off the projector and unplug the power cord before starting the procedure.
Necessary parts
New filter (available kit : R98010085, contains 5 high density filters and one cleanable filter)
How to replace
1. Remove the front cover, see "Removal of the front cover", page 300.
2. Push both fi lter holders to the outside.
Image 16-12
Filter replacement
3. Take out the filter and insert a new one.
CAUTION: Never clean the filter Always replace with a new one.
306 R5905032 HDX SERIES 01/06/2011
To Next Page
Loading...
