12. Alignment
12.2 Orientation
What can be done?
The way of physical installation of the projector can be defined to the projector.
The following installation are possible:
• front/table
• front/ceiling
• rear/table
• rear/ceiling
• auto front : automatic front, projector detects itself if it is ceiling or table mounted and projects always a readable image.
• auto rear : automatic rear, projector detects itself if it is ceiling or table mounted and projects always a readable image.
How to set the correct orientation
1. Press Menu to activate the menus and select Alignment → Orientation.
Image 12-1
Main menu, alignment
Image 12-2
Alignment, orientation
2. Use the ▲ or ▼ key to select the desired orientation and press ENTER to activate.
Image 12-3
Orientation list
R5905032 HDX SERIES 01/06/2011 187
To Next Page
Loading...
