Barco HDX series User Manual

9. Image
9.3.1 Contrast
About Contrast
The contrast function is used to adjust the contrast between the light and the dark areas of the displayed image. It applies a gain to
the red, green and blue signals.
Contrast adjustment can be done with the Contrast key on the RCU or via the menu structure.
How to adjust
1. Press Menu to activate the menus and select Image → Image Settings → Co ntrast.
Image 9-3
Main menu, Image
Image 9-4
Image adjustments
Image 9-5
Image settings, contrast
2. Press ENTER to select.
3. To change the value directly in the Image Settings window, use the ◄ or ► key or a numeric key 0-9 to adjust as a % of the full
range.
To adjust via the bar scale menu, press ENTER to display the Contrast menu and adjust with the ◄ or ► key. Press ENTER
again to enter the value directly with the numeric keys. Press EXIT to return to Image Settings menu.
Image 9-6
Contrast adjustment
R5905032 HDX SERIES 01/06/2011 117

Barco HDX series Specifications

General

Brand	Barco
Model	HDX series
Category	Projector
Language	English